Home/About
About VMPL Lights
An electrical manufacturer, building since 2018
VMPL Lights has been manufacturing electrical products since 2018, from Noida in Uttar Pradesh. Today the range covers roughly 450+ products across ten categories, sold under the VMPL and DOLLFINE brands.
We make the parts an installation is actually built from — the foot light on the stair, the switch on the wall, the board in the corridor, the box behind the plaster and the clip holding the cable to it.
Our focus stays on good quality and dependable performance, and on understanding what customers, electricians and dealers actually need on site rather than what looks good in a catalogue.
Company data
VMPL at a glance
The facts a dealer, distributor or buyer usually asks for first.
- Established
- 2018Manufacturing electrical products since 2018.
- Manufactured by
- VMPL Lights
- Head office
- V-Mart Bhangel, Main Dadri Road, Noida, Uttar Pradesh 201304
- Product range
- 450+ electrical productsAcross ten categories.
- Categories
- 10Lighting, fans, switches & switchgear, surface boxes, MCB boxes, wires & cables, concealed and fan boxes, clips, pipe clips and accessories.
- Brands
- VMPL · DOLLFINEVMPL is the flagship range; DOLLFINE is the value range. Both are made by the same company.
- Country of origin
- Made in India
- Supplied to
- Dealers, distributors, builders, construction houses, electrical businesses and channel partners
What we make
One brand, many electrical solutions
Roughly 450+ products across ten categories, so a shop or a site can be supplied from one account.
- Lighting products
- Fans
- Switches & switchgear
- PVC surface boxes
- MCB boxes
- Wires & cables
- LED concealed boxes
- Fan boxes
- Wire & cable clips
- Pipe clips
- Electrical accessories
LED Foot Lights
13 products
LED Concealed & Panel Lights
7 products
COB & Spot Lights
7 products
Modular & Non Modular Switches
3 products
Extension Boards & Plugs
5 products
MCB Distribution Boxes
4 products
Boxes & Modular Plates
3 products
Clips & Fasteners
3 products
Fans
6 products
Home Appliances
2 productsOur approach
Why we build the way we do
Every choice below is a decision about where a product usually fails, and what it costs when it does. None of it is decoration.
The supply is not 230 volts
Indian mains swing far outside their nominal figure, and most fittings are rated as though they do not. A light that dies on a bad evening is a light the customer replaces — and blames.
So we rate for the supply that actually arrives.
Elenza LED concealed light — rated 80 V to 348 VCurrent belongs on brass
A switch or socket fails where the current is carried and the heat builds. Plated steel is cheaper, and it is the first thing to go.
Our switchgear uses brass current-carrying parts on ceramic bases, so the contact survives the load it was sold for.
Kit-Kat fuse, 16 A switch and 16 A socket — brass parts with ceramicA distribution board should fail safely
A board is the one part of an installation whose job is to contain a fault. The material has to stop a fire rather than feed it, and the enclosure has to stay sound for years.
Fire retardant polycarbonate for the board and cover, brass connection terminals, a cold-plate base box with plastic coating, and a tag slip so circuits stay labelled.
Glaze and Java series — 1.5 mm and 2.0 mm cold plates, brass terminalsThe box in the wall never comes out
A concealed box is fitted once and then plastered over. If it rusts or loses its earth, the wall has to be opened again.
Galvanised sheet, rust proof, with a dedicated earthing terminal and nut protection.
Prime GI concealed box — 3 M, galvanised, earthing terminalA clip fails at the nail
The clip body rarely breaks. The nail bends, or it rusts, and the cable comes off the wall.
We use 100% imported nails, and we make the clip in eight sizes so the box on the shelf is the one the job needs — not the nearest one.
Cable clips 4, 5, 6, 7, 8, 10, 20 and 25 mm — imported nailsA cord is only as good as its plug
Extension boards are used hardest and inspected least. The switch is what wears out, and the cord is what overheats.
A master switch rated for 5,000 on/off cycles, a heavy-duty three-pin mains cord to Indian BIS standard, and a fire retardant high-grade plastic body.
4+1 extension board — BIS-standard cord, 5,000-cycle switchWhy choose VMPL
What you get by buying from us
Eight practical reasons, from the counter and from the site.
Ten categories, one account
Lighting, fans, switchgear, boxes, clips and accessories from a single supplier — fewer people to chase and one delivery to receive.
Two brands, two price points
VMPL for specification work and DOLLFINE for volume, on the same account, so you can quote either end of a job.
Materials chosen for the job
Brass where current flows, ceramic where heat builds, fire retardant polycarbonate in boards, galvanised steel in the wall.
Built for real supply
Products rated for the voltage Indian buildings actually deliver, not only for the figure on the nameplate.
Sizes that match the site
Eight cable clip sizes, pipe clips for UPVC and CPVC, wall plugs in three sizes, modular fittings in 2, 3 and 4 M.
Retail-ready packing
Fast-moving lines arrive in printed cartons and hanging packs that sell off a shelf without repacking.
Warranty on selected products
Several lines carry a one-year warranty or guarantee, printed on the product artwork itself.
Direct access to the makers
You speak to the people who manufacture the product, not to a call centre reading from a script.
Who we supply
The people we build for
Different buyers need different things from the same range.
Customers
Households buying a fan, a light or a heater that has to keep working.
Electrical dealers
Counter stock that moves — retail-ready packing across the fast lines.
Distributors
Volume across ten categories on one account, with both brands available.
Builders
Consistent supply across a project, from concealed boxes to final fittings.
Construction houses
Specification-level products where the installation has to pass inspection.
Electrical businesses
Contractors who need the right size in the van, first time.
Channel partners
Territory partnerships built to last rather than one-off orders.
Our journey
Since 2018
VMPL Lights began in 2018 with quality and customer satisfaction as the priorities, and has widened the range steadily since.
2018
The start
Manufacturing began with a narrow range, with quality and customer satisfaction set as the priorities from the first day.
Since then
Steady expansion
The range widened category by category — lighting, switchgear, boxes, clips, fans and accessories — with models added as the trade asked for them.
Today
450+ products
Roughly 450+ electrical products across ten categories, under the VMPL and DOLLFINE brands.
Dealers & distributors
Partners, not just accounts
We treat our dealers and distributors as an important part of the VMPL family — not simply as business contacts.
We consider our dealers and distributors not merely business partners, but an important part of the VMPL family.
We are actively adding dealers, distributors and channel partners in markets where we are not yet represented.
Our goal
Where we are heading
VMPL Lights wants to grow as a strong and trusted electrical brand — recognised for quality, reliability and service.
We keep working on new products, on better quality, and on understanding what our customers and partners actually need.
Get in touch
Talk to us about the range
Product questions, bulk quotes or dealership — we will come back to you.